December 2010 Archives by thread
      
      Starting: Wed Dec  1 00:20:59 PST 2010
         Ending: Fri Dec 31 18:24:25 PST 2010
         Messages: 497
     
- [TowerTalk] trying 3 different T-tuner suggester programs: TLW seems to lead an unwary user (me) astray.
 
Kevin Normoyle
 - [TowerTalk] tuners and power rating
 
Dan Zimmerman N3OX
 - [TowerTalk] tuners and power rating
 
Steve Hunt
 - [TowerTalk] Ground Rods
 
David Robbins
 - [TowerTalk] FW:  Ground Rods
 
Neil  Sheldon
 - [TowerTalk] TowerTalk Digest, Vol 96, Issue 1
 
RDStraw
 - [TowerTalk] Freezing prop pitch rotor
 
Zivney, Terry L.
 - [TowerTalk] Freezing prop pitch rotor
 
K7LXC at aol.com
 - [TowerTalk] Freezing prop pitch rotor
 
Jim Thomson
 - [TowerTalk] Breaking all the tower climbing rules at an amazing	height...
 
Joe Giacobello, K2XX
 - [TowerTalk] breaking all the rules
 
Gregg  Seidl
 - [TowerTalk]  Freezing prop pitch rotor
 
john at kk9a.com
 - [TowerTalk] Freezing prop pitch rotor
 
john at kk9a.com
 - [TowerTalk] Wanted KLM @m yagi insulators
 
N7KA at comcast.net
 - [TowerTalk] Condensation inside  LMR-1200 + 7/8" heliax ?
 
Jim Thomson
 - [TowerTalk] Condensation inside  LMR-1200 + 7/8" heliax ?
 
TexasRF at aol.com
 - [TowerTalk] Shipping Companies
 
Bill Kendrick
 - [TowerTalk] Shipping Companies
 
K7LXC at aol.com
 - [TowerTalk] 10M groundplane radials
 
Bill and Cindy
 - [TowerTalk] Breaking all the tower climbing rules at an
 
Jim Thomson
 - [TowerTalk] TowerTalk Digest, Vol 96, Issue 10
 
Larry & Karen
 - [TowerTalk] Shippimg
 
Bill Kendrick
 - [TowerTalk] Shipping Companies
 
Jim Thomson
 - [TowerTalk] Falling off ladder's.
 
Jim Thomson
 - [TowerTalk] Breaking all the tower climbing rules at an
 
Kenneth Goodwin
 - [TowerTalk] Tower Incident Joke
 
Jim Walker
 - [TowerTalk] Ladder Line Spacing from a Steel Tower
 
Sam Andrews
 - [TowerTalk] ladder safety
 
Tearlach Sinclair
 - [TowerTalk] Shunt Feeding a Crankup
 
Dan Bookwalter
 - [TowerTalk] Luso crank up tower's...a better mousetrap ?
 
Jim Thomson
 - [TowerTalk] This is about as dangerous as it gets.
 
Jim Thomson
 - [TowerTalk] Can capacity hats be installed inboard of a coil or LL	??
 
Jim Thomson
 - [TowerTalk] Can capacity hats be installed inboard of a coil or	LL ??
 
TexasRF at aol.com
 - [TowerTalk] 40 meter yagi over a 40 meter dipole
 
Gary Slagel
 - [TowerTalk] PL259 to CATV Hardline
 
K8RI on TowerTalk
 - [TowerTalk] Never-Seez and noalox?
 
Roger (K8RI)
 - [TowerTalk] Protecting fibreglass spreaders
 
Martin Sole
 - [TowerTalk] Small Prop Pitch water seal
 
NPAlex at aol.com
 - [TowerTalk] who's "right" (a tuner question)
 
jim feldman
 - [TowerTalk] who's "right" (a tuner question)
 
knormoyle at surfnetusa.com
 - [TowerTalk] penetrox and copper cote
 
W5JMW
 - [TowerTalk]  Bendix Synchro Set
 
Dean Runk
 - [TowerTalk] Never-Seez and noalox?
 
Jim Thomson
 - [TowerTalk] Using Ring Rotors on crank up towers
 
Jim Thomson
 - [TowerTalk] Fw:  who's "right" (a tuner question)
 
Sam Andrews
 - [TowerTalk] who's "right" (a tuner question),
 
Rob Atkinson
 - [TowerTalk] Fw:  Fw:  who's "right" (a tuner question)
 
Sam Andrews
 - [TowerTalk] SVHFS 2011 Conference Call For Papers
 
Robin Midgett
 - [TowerTalk] Never-Seez and noalox?
 
john at kk9a.com
 - [TowerTalk] Fw:  who's "right" (a tuner question)
 
Jim Thomson
 - [TowerTalk] who's "right" (a tuner question)
 
jim feldman
 - [TowerTalk] Never before asked question
 
K7LXC at aol.com
 - [TowerTalk] Never before asked question
 
TexasRF at aol.com
 - [TowerTalk] Sticking
 
Warrenwolff
 - [TowerTalk] wire yagis for the top band vs phased 26.5 m verticals
 
Chris Wagner
 - [TowerTalk] Dayton Hamvention Antenna Forum - May 2011
 
Tim Duffy K3LR
 - [TowerTalk] W6PU Dual driven quad
 
Martin Sole
 - [TowerTalk] Never before asked question
 
Jim Thomson
 - [TowerTalk] Never before asked question
 
K7LXC at aol.com
 - [TowerTalk] Noise puzzle (longish)
 
Pete F5VNB
 - [TowerTalk] Noise puzzle (longish)
 
David Robbins
 - [TowerTalk] wire yagis for the top band vs phased 26.5 m verticals
 
Dennis OConnor
 - [TowerTalk] Rohn 25 Sections for Sale
 
J.Gordon Beattie, Jr., W2TTT
 - [TowerTalk]  Fw: who's "right" (a tuner question)
 
Rob Atkinson
 - [TowerTalk] Cushcraft Antenna Traps
 
Elliott Lawrence
 - [TowerTalk] Welll...Sh...Shucks.
 
Roger (K8RI)
 - [TowerTalk] Fw:  Welll...Sh...Shucks.
 
Sam Andrews
 - [TowerTalk] Four Square Array: effect of placing tower with yagi etc in centre of four square
 
Barry Kirkwood
 - [TowerTalk] Four Square Array: effect of placing tower with	yagi etc in c...
 
TexasRF at aol.com
 - [TowerTalk] How Plumb does a tower need to be
 
Dan Bookwalter
 - [TowerTalk] How Plumb does a tower need to be
 
Alan Swinger
 - [TowerTalk] Stacking a 402CD over a Steppir
 
Roger Cooke
 - [TowerTalk] Reusing Coax
 
Roger (K8RI)
 - [TowerTalk] Stacking a 402CD over a Steppir (Barney Scholl)
 
Barney Scholl
 - [TowerTalk] Need modeling help: Tower and yagi(s) in centre of Four	Square
 
Barry Kirkwood
 - [TowerTalk] 205BA vs 205CA
 
Neil  Sheldon
 - [TowerTalk] 160m Shunt Feed
 
Kelley
 - [TowerTalk] 205BA vs 205CA
 
Dino Darling
 - [TowerTalk] 160m Shunt Feed (Kelley)
 
Craig Clark
 - [TowerTalk] 80/160 ANTENNA IS SHORT
 
Paul Sturpe
 - [TowerTalk] 80/40 coax trap dipole design
 
WW3S
 - [TowerTalk] 80/40 coax trap dipole design
 
Jim Thomson
 - [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night
 
Joe Giacobello, K2XX
 - [TowerTalk] Fractal Antennas, Chip Cohen (N1IR
 
Craig Clark
 - [TowerTalk] 80/40 coax trap dipole design
 
Jim Brown
 - [TowerTalk]  Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night
 
Dennis OConnor
 - [TowerTalk]  80/160 ANTENNA IS SHORT
 
Dennis OConnor
 - [TowerTalk] looking for Wilson tower foundation info
 
Rob Salsgiver
 - [TowerTalk] 80/160 ANTENNA IS SHORT
 
Dan Hearn
 - [TowerTalk] Fractal Antennas, Chip Cohen (N1IR
 
Jim Thomson
 - [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova
 
Jim Thomson
 - [TowerTalk] Handy bit of info
 
Its from KE4VYN
 - [TowerTalk] 80/40 coax trap dipole design
 
TexasRF at aol.com
 - [TowerTalk] Replacing the LL in 340N ele's  with coils
 
Jim Thomson
 - [TowerTalk] USt TX-472 and Fulton K2550 Winch
 
Dan Bookwalter
 - [TowerTalk] Moxon questions
 
r miles
 - [TowerTalk] Moxon questions
 
knormoyle at surfnetusa.com
 - [TowerTalk] Rebuilding traps on Cushcraft ATB-34
 
W7RIS - ARRL
 - [TowerTalk] Moxon questions
 
TexasRF at aol.com
 - [TowerTalk] RBX-40  by E-Z Way
 
Tower Su
 - [TowerTalk] 80/40 coax trap dipole design
 
Jim Brown
 - [TowerTalk] Fractal Antennas, Chip Cohen (N1IR) on Nova Last Night
 
jimlux
 - [TowerTalk] Rebuilding traps on Cushcraft ATB-34
 
Tony Brock-Fisher
 - [TowerTalk] Ideas for SMALL diameter support "rope"...
 
John
 - [TowerTalk] U.S. Tower MDP-750 motor failure and related prolems
 
Victor Morris
 - [TowerTalk] Rotor box problem
 
Tom Osborne
 - [TowerTalk] Stacking a 402CD over a Steppir
 
Roger Cooke
 - [TowerTalk] Ideas for SMALL diameter support "rope"...
 
Cqtestk4xs at aol.com
 - [TowerTalk] WA PE needed
 
K7LXC at aol.com
 - [TowerTalk] TowerTalk Digest, Vol 96, Issue 48
 
Wilson Lamb
 - [TowerTalk] Fw: [WISPA Members] Can anyone identify this type of	tower?
 
Marlon K. Schafer
 - [TowerTalk] RF current in REF + DIR ..how much ?
 
Jim Thomson
 - [TowerTalk] RF current in REF + DIR ..how much ?
 
Dennis OConnor
 - [TowerTalk] RF current in REF + DIR ..how much ?
 
David Robbins
 - [TowerTalk] Using Belden 9913F7 Vs. LMR-400UF : An Alternative.	Input by DAVIS RF Co
 
Stephen Davis
 - [TowerTalk] Using Belden 9913F7 Vs. LMR-400UF : An	Alternative.Input by DAVIS RF Co
 
Stephen Davis
 - [TowerTalk] TMM-433 HD upper limit switch photo request
 
Victor Morris
 - [TowerTalk] vertical performance
 
David
 - [TowerTalk] ARRL Antenna Compendium Vol. 8 question
 
k4tmc at aol.com
 - [TowerTalk] RF current in REF + DIR ..how much ?
 
Jim Thomson
 - [TowerTalk] [CQ-Contest] NAQP CW + Skimmer
 
Dave Hachadorian
 - [TowerTalk] After Christmas discount a bit early!
 
K1TTT
 - [TowerTalk] [CQ-Contest] NAQP CW + Skimmer
 
Dennis OConnor
 - [TowerTalk] Tailtwister T2X Rotator/Mast Mount
 
Ed G
 - [TowerTalk] NAQP CW + Skimmer
 
john at kk9a.com
 - [TowerTalk] Rope
 
Robert Chudek - K0RC
 - [TowerTalk] AR-22 rotor calibration
 
mikflathead at aol.com
 - [TowerTalk] Gigavac Relays
 
Howard Hoyt
 - [TowerTalk] Gigavac Relays
 
Jim Thomson
 - [TowerTalk] Baluns...again.
 
Jim Thomson
 - [TowerTalk] 160m vertical feed point impedance?
 
John
 - [TowerTalk] Waller flag
 
Mike
 - [TowerTalk] 1/4 wave coax  "Balun"?
 
Norman Alexander
 - [TowerTalk] 1/4 wave coax  "Balun"?
 
TexasRF at aol.com
 - [TowerTalk] 160M Inverted L Elev Radials EZNEC Model Wanted
 
Paul Ferguson
 - [TowerTalk] Splicing Aluminum Wire
 
Michael Tope
 - [TowerTalk] Length of Sloper?
 
RLVZ at aol.com
 - [TowerTalk] 1/4w matching, Common mode chokes and BAL-UN
 
NPAlex at aol.com
 - [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower over?
 
Brian Moran
 - [TowerTalk] Aluminum clad wire
 
Grant Saviers
 - [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower	over?
 
K7LXC at aol.com
 - [TowerTalk] Length of Sloper?
 
john at kk9a.com
 - [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower	over?
 
Brian Moran
 - [TowerTalk] Al Wire
 
Wilson Lamb
 - [TowerTalk] Al wire
 
Howard Hoyt
 - [TowerTalk] ground rod spacing
 
Jim Hoge
 - [TowerTalk] Using  aluminum wire [or aluminum clad wire]
 
Tod - ID
 - [TowerTalk] Using aluminum wire
 
Tod - ID
 - [TowerTalk] Using aluminum wire
 
Tod - ID
 - [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower	over?
 
john at kk9a.com
 - [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower	over?
 
K7LXC at aol.com
 - [TowerTalk] Ground Rods Question
 
n4zkf
 - [TowerTalk] Using aluminum wire (or aluminum clad) - for buried	radials?
 
Peter Sils
 - [TowerTalk] Crimp tool for cable ends
 
Jim Thomson
 - [TowerTalk] 1/4w matching, Common mode chokes and BAL-UN
 
Jim Thomson
 - [TowerTalk] Fwd:  Using  aluminum wire [or aluminum clad]
 
Jim Thomson
 - [TowerTalk] HDX-89 rotator replacement - w/o tilting the tower	over?
 
K7LXC at aol.com
 - [TowerTalk] Recommended Coaxial Surge Protector for HF
 
Bill Jackson
    
 
    
      Last message date: 
       Fri Dec 31 18:24:25 PST 2010
    Archived on: Sat Jan  1 02:09:06 PST 2011
    
   
     
     
     This archive was generated by
     Pipermail 0.09 (Mailman edition).