[TowerTalk] Tenndyne T10 near other aluminum

[Tom Anderson]

Joe:

I have a T-10 and was wondering the same question, only in addition I wanted to ground mount an HF6V all band vertical, but I understood the upper part of the band, i.e the ground antenna would cause interaction with the T-10 on 10-20m even though it was mounted at 50 ft.

Tom, WW5L

--- On Sun, 6/2/13, Joe Barnes <n4jbk at comcast.net> wrote:

> From: Joe Barnes <n4jbk at comcast.net>
> Subject: [TowerTalk] Tenndyne T10 near other aluminum
> To: towertalk at contesting.com
> Date: Sunday, June 2, 2013, 6:59 PM
> I would really appreciate the input (
> and output if you are efficient, I know I can’t believe
> that I said that either ) of anyone that might have an
> opinion about my mounting a Tennadyne T10 just below a 6
> meter and a 2 meter beam. The 6 meter beam will be the
> closest to the Tennadyne, the 6 meter beam is going to be
> either a 7 element on a 28 foot boom or a 13 element on a 56
> foot boom. Above that will be a 2 meter 19 element beam on
> what I believe is a 33 foot boom. If I put the T10 at least
> 6 feet below the 6 meter beam how much interaction do you
> think there will be? Thank you for your help, Respectfully,
> Joe N4JBK.
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>