[TowerTalk] need motor shaft pulley US Tower HDX-572

[Mike Fahmie]

Ken,

My HDX572-MDPL is 2002 vintage.  The V-belt motor pulley is 2.5"OD and bears the following markings;
AK25, and K273 (the 3 is vague, might be an 8).  The V-belt is L4-370G. My motor shaft is 5/8" OD and the key is 3/16" wide.  No brand name is visible. 


Hope that helps.

-Mike-
WA6ZTY


>________________________________
> From: Kenneth Sobel <kenxxx at optonline.net>
>To: towertalk at contesting.com 
>Sent: Thursday, April 17, 2014 2:15 PM
>Subject: [TowerTalk] need motor shaft pulley US Tower HDX-572
> 
>
>I have a US Tower HDX-572MDPL since 1998.
>Motor was replaced in 2011.
>Motor shaft pulley cracked in 2012 and was replaced by tower guy who has since left the business.
>Now the replacement pulley has cracked.
>
>I ordered a new pulley from US tower, but they sent a 3.5 inch pulley for the cables instead of
>the smaller pulley for the motor shaft. I did clearly explain that I needed the motor shaft pulley.
>
>I called US tower last Friday April 11, but the woman who answered said that she was filling in and someone
>would get back to me.
>
>I called again on Monday April 14, but got transfered to voicemail. And no one returned my call.
>
>Does anyone know the specs for the motor shaft pulley so that I can buy one on the internet?
>
>Ken
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>