[TowerTalk] DC multi outlets

[Jim Brown]

On 1/11/2014 4:08 PM, Jim Lux wrote:
> I use a variety of Anderson PowerPole based distribution schemes. The 
> basic connector is available in a whole lot of different current ratings.

This is what I use. I put the smaller ones (the family that used by the 
K3) on every piece of equipment in my shack that runs on 12-14VDC.  I 
use the larger grey plugs at each power source (power supply or 
battery), with a mating grey plug that is wired to multiple cables with 
the smaller plugs.
>
> West Mountain Radio makes a variety of fused and unfused distribution 
> panels. Rigrunner 4005, etc.

I have two of these in my station, and they're both full.

>
> PowerWerx.com has been a good vendor for me
> http://www.powerwerx.com/powerpole-power-distribution/
> I get my West Mountain stuff from them (as well as the connectors)..

Same here -- they seem to have the best prices on Power Pole connectors, 
and have been good to deal with.
>
> A crimper for the inserts is nice, but not essential. 

I've never uses a crimper on Power Poles.

73, Jim K9YC