[TowerTalk] Multi-station antenna selection patch panel

Larry lknain at nc.rr.com
Sat Jan 18 07:25:20 EST 2014


I don't know that this will help. It shows a 2x6 switch arrangement. I was 
thinking it was from K1XM but it is actually from KK1L.

http://home.comcast.net/~kk1l/kk1l_2x6switch/switch_page.html

73, Larry  W6NWS

-----Original Message----- 
From: David Robbins
Sent: Saturday, January 18, 2014 7:07 AM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Multi-station antenna selection patch panel

Agree, any to any gives lots of relays no matter how you do it.  but you
really don't need vacuum relays, most of the common switch boxes today just
used regular frame relays.  If you want to keep cost down by using off the
shelf parts try looking at the rcs-10 remote switches that do 8 to 1, I am
using them for my rx antenna switching:
http://wiki.k1ttt.net/2011%20Maintenance%20and%20Upgrade%20Blog.ashx#bevswit
ch  and they work well... of course there is no lockout, you would have to
come up with that in whatever provides the control power.  I think k1xm was
working on something like that, but not sure how far it ever got.


David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net


-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Jim
Lux
Sent: Saturday, January 18, 2014 03:13
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Multi-station antenna selection patch panel

On 1/17/14 5:10 PM, krishna kanakasapapathi wrote:
> Howdie,
>   I am looking into build a panel that would distribute 8 to 10
> antennae to 5 to 6 stations in a
>   any-to-any setup to handle 1kw. Prefer lockout( if a sophisticated
> design), but even manual switching would
>   be sufficient. I know it needs vaccum relays etc.
>   Don't want to reinvent the wheel. Where can i find a good
> design/precedent ?
>


A couple things to think about.. what sort of isolation do you need?
That sets the number of sets of contacts you need between two paths.

I'd look at some sort of crossbar arrangement, but that's 60 relays.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk 



More information about the TowerTalk mailing list