[TowerTalk] FXL-780 hardline connector prep

[Bob K6UJ]

Gary,

Attached  is a you tube video on installing the EZ connectors.
Let me know how it goes with your install.  I am ordering some 7/8 
smooth wall,
and haven't decided on the connectors yet.  The EZ connectors look 
fairly easy
and looks like can be done without special tools.

Bob
K6UJ




On 5/23/16 9:07 AM, Gary Smith wrote:
> Hi,
>
> I just obtained some Commscope FXL-780 smooth wall 7/8 hardline. No
> connectors came with it.
>
> I ordered some Commscope 78EZNF-N Female Connectors which are
> designed for this cable, but what I'm not sure about is how to prep
> the cable for these connectors unless you use the Commscope prep
> tools to do this. I can only find very expensive tools for this and I
> only need to attach a connector on each end and then the tool is
> useless to me.
>
> The connector is seen here:
>
> http://www.commscope.com/catalog/wireless/product_details.aspx?id=1754
> 1
>
> or use this link: http://tinyurl.com/zp35ev3
>
> The foam has to be cored out, the jacket removed & I understand there
> is a flaring to be made on the center conductor and also one on the
> shield before joining the two halves of the connector. I'm not aware
> of how you do this by hand without the speciality tools. I don't know
> the dimensions or depths of the cuts/foam removal.
>
> Any suggestions?
>
> Thanks & 73,
>
> Gary
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>