[TowerTalk] up/down switch needed for US Tower HDX589

[Richard (Rick) Karlquist]

That switch merely controls relay coil current.
The relays do the heavy work.  You don't need
a lot of current rating.

Rick N6RK

On 11/25/2016 3:24 PM, K6UJ Bob Harmon wrote:
> The up/down switch on the control box for my US Tower HDX589-MDPL needs to
> be be replaced.  I may call US Tower next week and see if they have a
> replacement switch but I removed it and it doesn't look to be anything
> special.  I'm pretty sure it is a 3-pole double throw toggle switch.
> Its hard to read the info on the switch but it looks like it is rated for
> 10A 250VAC  and 15A 120VAC.  Cant make out the other info.
> Anyone replace one of these ?  I dont have the schematic for the
> control box which would help to figure it out.
>
> Bob
> K6UJ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>