[TowerTalk] Hardline

[jimlux]

On 12/18/19 11:42 AM, Mac wrote:
> I would add from my experience it is not necessary to pressurize this, 
> if you had even considered it in the first place,  esp if you feel your 
> connectors are waterproof. My doubt is you are not going to be using 
> this for its power handling ability, but more likely for its attenuation 
> qualities.
> 
> As for bending and use, well its on par with #3 rebar possibly #4 rebar. 
> Seriously it is a PIA but if its what you want and the price is right, 
> then your sweat equity will be well rewarded. I have a fair amount of 
> EIA air SS fittings at no cost but for the price of shipping, including 
> bullets as well
> 

yeah, rebar is a good comparison for bending. Rebar is slightly lighter 
(I'm surprised, but #4 is 0.67 lb/ft)