[TRLog] SS logs don't have serial numbers

[Udo Lautenbach DL2ZAV]

-----Ursprüngliche Nachricht-----
> > My logcfg.dat file for sweepstakes included the following command:
> > LOG FREQUENCY ENABLE = TRUE
> > It was nice to see what frequency I worked people on, to see a pattern
> > to  my madness in operating.  However, now I see the log.dat file
> > does not have the serial numbers that I sent.  I see nothing in POST
> > that will enable me to get those pesky required numbers back!
>
> Assuming that you haven't manually re-ordered the QSOs in the log,
> the sent serial number is implied by the order of the QSO in the log.
> That's why Tree could replace the sent serial number with the freq -
> the sent serial numbers were redundant information.
>
> I've not tried it myself, but I bet if you use POST to generate a Cabrillo
> or ARRL SFF logfile, it will have the serial numbers correct.  Or did you
try
> that and still not have sent serial numbers?
>

No, POST C (Create Cabrillo file) does not restore the numbers.
You could try POST L C (i. e. Log procedures - Create final logs)
Select no separation per band, nor per mode and select RENUMBER QSO NUMBERS.
You'll get a LALLBOTH.DAT with QSOs numbered as they appear in your log.
Now make a copy of your SS.CFG (or whatever name you selected) named
LALLBOTH.CFG.
Run POST C and rename LALLBOTH.CBR to <yourcall>.CBR.
Hope this works.


--... ...--
Udo

dl2zav@darc.de

Ich logge mit TR-Log.
TR-Log-Online-Home-Page in Deutsch: www.trlog.onlinehome.de




--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:	  http://web.jzap.com/n6tr/trwish.html