[Trlog] How to correct logged band errors?

[Ronald Rossi, KK1L]

Or just run TR RESCORE which does all of the extra stuff automatically. 
Your original log will be saved just as normally done when running POST.

Kenneth E. Harker wrote:
> On Sun, Mar 28, 2004 at 08:12:16PM -0800, Eric Hilding wrote:
> 
>>My rig interface got messed up at times due to RF problems from the 
>>20-15-10 vertical I installed on the roof directly over the shack ;-(
>>
>>I went into the .dat & .log file and made corrections for the known entries 
>>which got logged as 160m QSOs when they were really 10m 
>>ones.  Unfortunately, when I re-open TR (the .cfg) file, the 160m total 
>>still includes the mis-logs.
>>
>>So I tried to see if I could edit the .rst file with Notepad thinking that 
>>might be a final fix, but too many bizarre characters.
>>
>>In a nutshell... "HELP!"... how to fix things???
>>
>>Tnx much.  Not a major score here but would like to see an accurate log 
>>sent in for the club effort.
> 
> 
> Here is what I would do:
> 
> rename your corrected log file to something like FIXED.LOG
> (if it's a CW contest, add CW TONE = 0 to your .CFG file)*
> At the command prompt, type TR READ FIXED.LOG
> 
> TR READ will read in the QSOs from the FIXED.LOG file, and 
> recompute dupes, band totals, QSO points, and multipliers, 
> resulting in a newly-computed score, and a fresh .LOG file
> that you can then use in POST.  It actually reworks the 
> contest, and is fun to watch.  You can learn more about
> TR READ in the manual.
> 
> *Otherwise, TR will send the CW of the sent portions of every
> QSO to the PC speaker.
> 

-- 
73 es God Bless de KK1L...ron (kk1l at arrl.net)
<><
QTH: Jericho, Vermont

My page: http://www.qsl.net/kk1l