[WriteLog] Problem with 10.45 %O command in macro

[Jerry Pixton]

Jerry, et al

No, I can't get it to work on my IC756proII. I find a command to determine 
if I have to hold the Clear button or just press it. But nothing to 
activate the Clear button itself which would seem more useful.

Works fine on my FT1000mp so that is where I am starting to concentrate my 
"running"

Jerry, W6IHG


At 03:13 AM 1/29/2004 +0000, Jerry Flanders wrote:
>Check the list of CI-V Control Commands in your ICOM manual. 756PRO does 
>not have a command to clear the RIT, bit I think the 756PROII does. Your 
>746PRO radio may go either way.
>
>If you have no command to clear it, it won't happen.
>
>Jerry W4UK
>
>At 02:12 1/29/04, Bill Turner wrote:
>>The version 10.45 upgrade says:
>>
>>*       Add %O (RIT clear), %L (log the QSO), and %W (wipe the Entry
>>Window) commands to CW/RTTY/SSB messages.
>>
>>On my IC-746PRO, the %L and %W work fine, but the %O does not work at
>>all.  Any ideas?
>>
>>--
>>Bill, W6WRT
>
>
>_______________________________________________
>WriteLog mailing list
>WriteLog at contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web:  http://www.writelog.com/

------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton at shentel.net
------------------------------------------