[WriteLog] Filter Reset by Clicking Spot

Richard (Rick) Karlquist (N6RK) richard at karlquist.com
Sun Nov 28 23:20:25 EST 2004


Is there any fix for this on the FT-1000D?  

Rick N6RK

> -----Original Message-----
> From: writelog-bounces at contesting.com
> [mailto:writelog-bounces at contesting.com]On Behalf Of George Skoubis
> Sent: Sunday, November 28, 2004 8:15 PM
> To: writelog at contesting.com
> Subject: RE: [WriteLog] Filter Reset by Clicking Spot
> 
> 
> Hi,
> 
>   We had this discussion a few months ago (it may have been on the
> TenTec or Orion reflectors). The Orion allows you to set the "default"
> DSP bandwidth in each mode.
> 
>   A. Set your DSP bandwidth to the width you prefer using the BW knob.
> 
>   B. Press the mode button. 
> 
>   C. Choose a different mode.
> 
>   D. Press the mode button and return to the original mode.
> 
>   The bandwidth you set is now the default bandwidth.  
> 
>   Do this for each mode and change as often as you wish... I used
> Writelog and an Orion this weekend and operated Assisted so I know it
> works FB...
> 
> 73,
> 
> George / KF9YR
> 
> -----Original Message-----
> From: writelog-bounces at contesting.com
> [mailto:writelog-bounces at contesting.com] On Behalf Of Barry Merrill
> Sent: Sunday, November 28, 2004 7:06 PM
> To: 'Robert Carroll'; writelog at contesting.com
> Subject: RE: [WriteLog] Filter Reset by Clicking Spot
> 
> I reported this problem last Spring to the Ten-Tec forum and to Scott at
> Ten Tec; 
> the bandwidth also changes when frequency is commanded from QSO Entry
> window.
> 
> TenTec never advertises in advance what's going to be fixed in the next
> firmware,
> but I'm hoping; I've had to relegate the Orion to SSB only because of
> this problem.
> 
> Also: you cannot use a single COM port for both CW and Rig Control with
> Orion
> and WriteLog (but single COM works just fine with Icom 756PROII).
> 
> Barry, WS5GN
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> 
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.802 / Virus Database: 545 - Release Date: 11/26/2004
>  
> 
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.802 / Virus Database: 545 - Release Date: 11/26/2004
>  
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> 
> 


More information about the WriteLog mailing list