[WriteLog] Possible Problem with 10.56C

[Steve AI9T]

One thiing I did was change the baud rate from Auto to 9600 baud on 
rigs, and the program that seems to help. It still disapears every once 
in a while but not as bad. Never did that before I upgraded.

-- 
73

Steve AI9T

http://www.ai9t.com

QSL via LOTW and EQsL




JE Brown wrote:

>Stevem
>
>Exactly.  Slow tuning seems to help.  Tune quickly and the rig disappears.  I have found that going into port setup, then out again will restore the freq.  Looks like a patch is needed.
>
>Jim  W4LC
>  ----- Original Message ----- 
>  From: Steve AI9T 
>  To: JE Brown 
>  Cc: Dick Thompson ; Writelog at contesting.com 
>  Sent: Saturday, December 03, 2005 04:38
>  Subject: Re: [WriteLog] Possible Problem with 10.56C
>
>
>  Having the same problem here with the new version here. Having to keep an eye on it during the TARA contest. Every time it looses rig have to save configuration to get it back. Like the com port is going on and off. 
>
>  
>