[WriteLog] CW Keying problems
al9a at mtaonline.net
Mon Jun 9 12:28:20 EDT 2008
On CW PTT... try changing the 'None' button to 'On LPT pin/COMM RTS'. I
think that may do it.
----- Original Message -----
From: "Magnus Aronsson" <sm6wet at telia.com>
To: "WriteLog Reflector" <writelog at contesting.com>
Sent: June 08, 2008 8:39 PM
Subject: [WriteLog] CW Keying problems
> I recently had a hard disk crach which resulted in me getting a new
> Intalled my writelog version which is 10.44b and had most things running.
> With newer computers today one gets none or only 1 com port so I installed
> extra card with 2 com ports.
> My com ports are for some reason #1, #3 & #4.
> Now, I plugged my rig control cabel to #1 (main board com port) and had
> control work FB.
> I plugged my CW transmit interface that I used for years with this version
> of WL without problems to port#3 and rig would hang in transmit when in CW
> I tried to connect it to #4 and still had the same problem.
> Thinking this had to do with my serial port card I plugged rig control to
> port#3 and my CW keying interface to port#1.
> Guess what - radio control works, but CW keying still hangs.
> This tells me there is probably nothing wrong with the ports but instead
> This is how I have the Setup/ports:
> CW on COM1
> Rig on COM3
> DVK Type is Windows Sound Board
> CW Keyer Type is PC Generates
> CW PTT... is None (e.a. QSK)
> What did I miss?
> 73 de Magnus SM6WET
> WriteLog mailing list
> WriteLog at contesting.com
> WriteLog on the web: http://www.writelog.com/
More information about the WriteLog