[WriteLog] Problem with WriteLog and WinKey?

[VE3XD]

Hi Jim,

Using the pot my speeds are continuous until it gets to the higher speeds like 28 and above. Then
the increment increases and is greater for each step after that.

In Writelog I generally leave the pot at the lowest setting and use Writelog for changing speeds.
Several versions back I had problems using the pot so have avoided it since. I'm using 10.68F.

73, Don VE3XD

> -----Original Message-----
> From: writelog-bounces at contesting.com 
> [mailto:writelog-bounces at contesting.com] On Behalf Of Jim Reisert AD1C
> Sent: September-05-09 12:47 PM
> To: Writelog
> Subject: [WriteLog] Problem with WriteLog and WinKey?
> 
> I'm not sure WinKey speeds are working correctly.
> 
> I'm using the speed pot on my microKEYER.  According to the 
> bottom of the WriteLog window, the speed is continuous i.e. 
> 22, 23, 24, 25,26, 27, 28 WPM.  But the speed being sent by 
> the program seems stepped, as if it's only using the values 
> from my .INI file:
> 
> cwspd08=22
> cwspd09=25
> cwspd10=28
> 
> I don't remember this being a problem in the somewhat distant past.
> 
> 73 - Jim AD1C
> 
> --
> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, 
> http://www.ad1c.us _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>