[WriteLog] getting to work with icom pro 3

[Norm Duxbury, W1MO]

Scott,

Make sure Writelog is set for 9600 baud (and not "default" or "auto") and 
that you have a check mark under the ""Poll" column.

73, Norm - W1MO

----- Original Message ----- 
From: <W4so at aol.com>
To: <writelog at contesting.com>
Sent: Wednesday, April 18, 2012 06:56
Subject: [WriteLog] getting to work with icom pro 3


> guys
> I am trying to figure out how to get the radio to display on the program.
> I upgraded my write log program to the most recent program a few days  ago
>
> I never had the computer able to display the radio's frequency.
> I am able to key the radio and send cw but that is the extent
>
> I am using the microham usb interface II and upgraded the most recent
> software on it as
> well
>
> I have the radio set on com 4 and cw set on com 5
>
> the radio is set for the following 6eh per the manaual
> baud rate 9600 , ci-v transceive on
> and ic731 off
>
> the program is set as I said the first line in the writelog program is set
> for com 4 , the radio is icom pro III
> and the second line is set for com 5 the cw.
>
> the settings in the microham virtual ports is set the same way as above .
> com 4 is radio and com 5 is cw
>
> what am I doing wrong?
>
> i can key the radio with the program and send cw , just not getting the
> freq display
>
> thanks
> scott w4so
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1913 / Virus Database: 2411/4941 - Release Date: 04/16/12
>