[WriteLog] Cannot Configure ver 11.16G for CW
Joe Subich, W4TV
lists at subich.com
Sat Apr 19 18:50:54 EDT 2014
Before running WriteLog did you run "Sound board mixer control" to
set the audio outputs and inputs for RTTYrite, and the WriteLog DVK?
XMMT.ocx and 2-Tone override audio handling for RTTY only.
... Joe, W4TV
On 4/19/2014 6:29 PM, John W. Tipka wrote:
> Upgrade from WinXP to Win 7 32bit. WL placed in C:\Writelog.
> K1EL Keyer - Virtual port COM2
> Elecraft K3 w/ Microham router 8.4.6 w/WL_11.16G. Microham MicrokeyerII
> WL configures correctly for FSK w/ XMMT.ocx/MMTTY/2Tone. Standalone
> MMTTY is correctly configured.
> A change from FSK RTTY w/clones to CW is unsuccessful.
> Procedure used:
> 1) RTTYRITE 2Tone window is closed. RTTYRITE 'TU type' menu selected.
> 2) "Sound Board AFSK" selected. (XMMT.ocx is now unchecked)
> 3) RTTY Control Panel disappears.
> 4) Select RTTYRITE Mode menu, select "CW" (45 baud (60 WPM) Baudot now
> 5) Select RTTYRITE Port menu, select "None" (No change from RTTY setting)
> 6) CW-Rttyrite and the Writelog CW Receiver now open.
> Pitch range of WL CW Receiver set in range of same pitch as K3.
> Received WPM within range set in configuration.
> HOWEVER, no audio waveforms are displayed on Writelog CW Receiver. No
> signals demodulated.
> What have I forgotten to do? Any help is appreciated.
> 73 John W8UL
> WriteLog mailing list
> WriteLog at contesting.com
> WriteLog on the web: http://www.writelog.com/
More information about the WriteLog