[WriteLog] TR: MMTTY separate temporary from WRITELOG

[Joe Subich, W4TV]

What transceiver are you using?

WriteLog will not "release" the CW/PTT port unless you load
a new ini file or use "setup" to disable CW.  So unless you
put CW/PTT on the same port as radio control, you will need
a third port (and FSK/PTT interface) to run a separate copy
of MMTTY anyway.

73,

    ... Joe, W4TV


On 1/21/2014 7:42 PM, G wrote:
> Joe
> I tried in the pass and for some reasons it did'int work.
> So I got in touch with RB tech & was told that to operate RTTY ((( FSK ))) (
> for the RTTY filters & TPF during contests ) I have to use two port on my
> desktop to Rigblaster Pro.
>
> This week I will try your below details & download those softwares
> Gilles ve2lx
> ==================
>
>
>
>
> -----Message d'origine-----
> De : WriteLog [mailto:writelog-bounces at contesting.com] De la part de Joe
> Subich, W4TV
> Envoyé : 21 janvier 2014 14:35
> À : G; [WriteLog]
> Objet : Re: [WriteLog] MMTTY separate temporary from WRITELOG
>
>
>> WL being hooked to MMTTY by MMTTY plugin we do not have access to com
>> port in MMTTY to temporary configure it to RX on its com and TX on
>> new com port.
>
> That is not correct - (((((( one can set the port using the RTTYrite Port
> menu and reinitialize the MMTTY plug-in if using the *old* SM6SRW
> plug-in.  If using the new XMMT.OCX version of MMTTY, one can set
> the FSK Port to *none* in the RTTYrite menu and select the port in
> the MMTTY configuration dialog.))))))
>
>   > I use WL on com 1 for RX no TX and com 2 for TX.
>
> I do not understand why you would use two ports for Writelog.  CW is
> supported on the same port as radio control so one only needs two
> ports for radio control, CW, PTT and RTTY.
>
> 73,
>
>      ... Joe, W4TV
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>