Amps
[Top] [All Lists]

[AMPS] two questions, TWO problems

To: <amps@contesting.com>
Subject: [AMPS] two questions, TWO problems
From: w8jitom@postoffice.worldnet.att.net (w8jitom@postoffice.worldnet.att.net)
Date: Sun, 7 Sep 1997 11:30:09 +0000
> From:          "Ian White, G3SEK" <G3SEK@ifwtech.demon.co.uk>
> Subject:       Re: [AMPS] two questions
To: <amps@contesting.com>
> Date:          Sat, 6 Sep 97 07:43:25 +0000

> A number of VHF mountain-toppers are using modified computer switch-mode
> supplies for 6V heaters, to avoid problems with generator sags and
> surges. Apparently the fully-enclosed and filtered units work well, but
> I'm sure an open-frame or unfiltered switcher would be a disaster on
> receive. Also, this is information relates to VHF - suppression of
> switching transients may not be so good at HF.
> 
> Bottom line: it's worth a try.

But be careful!

The LAST thing you want at turn on is a stiff voltage regulated 
supply! It would be inrush city for the filament.

Also, many supplies have fold-back current limiting. Those supplies 
will often NEVER come out of limiting and run a filament!

Finally, if the supply does come out of limiting slowly, the filament 
warm up time is increased. If you use a MOX cathode tube you could 
strip the cathode from insufficient warm up time with a fold 
back current limited supply, IF it ever comes up at all. 

By the way, the largest failures in amateur PA tubes are NOT related 
to excessive filament voltage . The most common 
non-tube-manufacturing related defects are gas or dissipation 
related damage, not low emission or open filaments.

 

73, Tom W8JI

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>