Amps
[Top] [All Lists]

[AMPS] Transformers

To: <amps@contesting.com>
Subject: [AMPS] Transformers
From: measures@vc.net (Rich Measures)
Date: Tue, 9 Mar 1999 08:38:05 -0800


>
>Rich says:
>
>>?  Many models of Henry amplifiers do not use a peak discharge-current 
>>limiting glitch resistor is series with the hv positive lead.  Most of 
>>the hv transformer failures I have heard of in Henry amplifiers were 
>>associated with a noisy arc in the RF output compartment.  .  
>
>Rich, what was the failure mode? Open circuit, shorted turns, or insulation
>breakdown?
>
secondary insulation failure

>My only experience with HV xfmr failure has been insulation breakdown. That
>was using an (unpotted!) 1200 - 0 - 1200 in a FW bridge, in a remote
>controlled  amp out in the garage. 
>
>Should have known better - 1) xfmr not intended for that many volts from
>winding to frame. 2) using an unpotted xfmr in a damp location.
>
Proving once again that paper is really and truly hygroscopic
-  cheers, Peter. 


Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>