Ok Gang
Here is a practical question. I'm building an amp and have the tube,
socket, chimney and blower. I'm interested in testing the the airflow of
the system and have seen a couple of write ups on the test using said
components along with a cardboard box and manometer. I can obtain a
cardboard box easily enough but have no idea of where to get a manometer.
It needs to measure up to at least 2 inches of water and have a resolution
of .1 inches. I'm all ears or eyes as the case may be.
73s
Bob
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|