Amps
[Top] [All Lists]

[AMPS] RF filament choke for indirectly heated cathodes?

To: <amps@contesting.com>
Subject: [AMPS] RF filament choke for indirectly heated cathodes?
From: N6BUU@aol.com (N6BUU@aol.com)
Date: Wed, 21 Jun 2000 16:50:50 EDT
In a message dated 06/21/2000 01:27:20 PM Pacific Daylight Time, 2@vc.net 
writes:

<< 
 Good point, Hank.    My guess is that most of the manufacturers have 
 engineers with limited educations.  .  For instance, all of the 
 Ameritron/MFJ amps use a HV ''bypass'' cap that has 88-ohms of Xc at 
 1.8MHz (1000pF).   What kind of a bypass is 88-ohms of Xc?   During a 
 debate with Ameritron/MFJ's head engineer, it became apparent that he did 
 not understand algebraic or scientific notation.     
 
 cheers
 
 -  Rich..., 805.386.3734, www.vcnet.com/measures.  
 end >>
IT COULD BE THAT MFJ IS A BIT LIKE THE EARLY HEATHKIT COMPANY(circa 
1950's)......HEY WE HAVE A TON OF THESE SURPLUS CAPS, THEY "LOOK" ABOUT 
RIGHT, LETS USE THESE!            HANK

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>