[AMPS] Output Pulse from ICOM 706

To:	<amps@contesting.com>
Subject:	[AMPS] Output Pulse from ICOM 706
From:	2@vc.net (measures)
Date:	Thu, 4 Jan 2001 06:54:26 -0800

>
>Is this phenomena peculiar only to Icom rigs, or do Yaesu and Kenwood do it
>also?
>
The TS-830S has roughly 20% overshoot on SSB or CW.  

cheers, Peter

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Output Pulse from ICOM 706, (continued) [AMPS] Output Pulse from ICOM 706, J. Bradshaw [AMPS] Output Pulse from ICOM 706, paul [AMPS] Output Pulse from ICOM 706, Peter Chadwick [AMPS] Output Pulse from ICOM 706, Tom Rauch [AMPS] Output Pulse from ICOM 706, Peter Chadwick [AMPS] Output Pulse from ICOM 706, <g3sek@ifwtech.com (Ian White, G3SEK) [AMPS] Output Pulse from ICOM 706, Mark Keith [AMPS] Output Pulse from ICOM 706, Tom Rauch [AMPS] clicks, over shooting etc., Uwe Egen [AMPS] Output Pulse from ICOM 706, measures [AMPS] Output Pulse from ICOM 706, measures <= [AMPS] Output Pulse from ICOM 706, Doug Hall [AMPS] Output Pulse from ICOM 706, Doug Hall [AMPS] Output Pulse from ICOM 706, Tom Rauch [AMPS] Output Pulse from ICOM 706, Jeff Wolf [AMPS] Output Pulse from ICOM 706, Jeff Wolf [AMPS] Output Pulse from ICOM 706, Jeff Wolf [AMPS] Output Pulse from ICOM 706, Steve Eldridge [AMPS] Output Pulse from ICOM 706, measures [AMPS] Output Pulse from ICOM 706, measures [AMPS] Output Pulse from ICOM 706, measures

Previous by Date:	[AMPS] AL-1500, AL-82, AL-1200, QRO???, measures
Next by Date:	[AMPS] Output Pulse from ICOM 706, <g3sek@ifwtech.com (Ian White, G3SEK)
Previous by Thread:	[AMPS] Output Pulse from ICOM 706, measures
Next by Thread:	[AMPS] Output Pulse from ICOM 706, Doug Hall
Indexes:	[Date] [Thread] [Top] [All Lists]