Amps
[Top] [All Lists]

[AMPS] Output Pulse from ICOM 706

To: <amps@contesting.com>
Subject: [AMPS] Output Pulse from ICOM 706
From: 2@vc.net (measures)
Date: Fri, 5 Jan 2001 08:44:54 -0800
>
>> Nothing complicated needed to see this - just use an ordinary power/SWR
>> meter and turn the power down on the ICOM. Watch the meter when you key
>> the rig.
>> 
>> Paul
>
>Hi Paul, 
>
>No way. You only see a tiny bit of the actual spike. 
>
>You can not see the peak power that way, even with many peak 
>reading meters.
>
>It takes a fast meter with a long storage time or a storage scope 
>(or one with long persistence and high intensity and horizontal 
>sweep off) to see the real peak.
>
one can see the peak with delayed sweep oscilloscopes.  

end

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>