[Top] [All Lists]

[AMPS] Additional Info Voltage Doubler/Filter Capacitance

To: <>
Subject: [AMPS] Additional Info Voltage Doubler/Filter Capacitance
From: Ian White, G3SEK" < (Ian White, G3SEK)
Date: Fri, 21 Sep 2001 18:01:58 +0100
Tom Rauch wrote:
>I left out the fact I used one ampere of load current in the example 
With a 2600V/80-ohm transformer, the 6*1N5408 rectifiers I just posted,
a 30uF/2-ohm capacitor, 60Hz mains and 1A constant-current load, it
predicts an average for V(C1) of 3260V with ripple between 3359 and


Note that the figures in the table beside the check box are for the
time-frame of the *whole* analysis... including the start-up period. 
To get correct steady-state figures, you have to set a reporting delay
and click Simulate again.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>