[Top] [All Lists]

[AMPS] Additional Info Voltage Doubler/Filter Capacitance

To: <>
Subject: [AMPS] Additional Info Voltage Doubler/Filter Capacitance
From: Ian White, G3SEK" < (Ian White, G3SEK)
Date: Fri, 21 Sep 2001 19:55:32 +0100
Tom Rauch wrote:
>> >I could only run the bridge rectifier program
>> Double-click at the *top left* or *bottom left* corner of the
>> schematic to change the rectifier configuration. Double-click *on* the
>> rectifier to select the diodes from the drop-down list.
>Doesn't work. I can double click all over the place and it stays a 
>bridge. The help file says to doubleclick, you say to double click, 
>but nothing happens.
>I have version downloaded.

The current version (since March) is 2.0.1 build 32, downloadable from: (855KB).

It could be that will fix your Pegasus problem also.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>