Dan, most 811 designs probably are 40 years old! But you might consider
making a copy of the Ameritron AL-811...its manual contains complete
schematic diagrams and parts lists, and Ameritron even sells the parts if
you're missing some. -WB2WIK/6
"Success is the ability to go from failure to failure with no loss of
enthusiasm." -Winston Churchill
> -----Original Message-----
> From: Dan Evans K9ZF [SMTP:danlevans@msn.com]
> Sent: Thursday, April 03, 2003 6:28 PM
> To: amps@contesting.com
> Subject: [Amps] modern 811 designs?
>
> Hi Folks,
>
> Can anyone point out any good 811a amp designs on the web, or elsewhere?
> I'm considering building an 811 based amp for a "beginner-amp-builder"
> project. Basically, I'm just looking for something fairly simple, and
> cheap, I can build and learn from. Besides, I probably have most of the
> parts I need in the old junk box.
>
> I am aware of a couple of designs on the ARRL's web site, but the newest
> one
> there I've found is 40 years old, there is bound to be some newer designs
> out there:-)
>
> And please, no flames from the anti-CB crowd. I have absolutely no
> interest
> in 11 meters, or any illegal operations.
>
> Thanks,
> Dan
> Dan Evans K9ZF
> Scottsburg, IN 47170
> {EM78}
> K9ZF /R no budget Rover
> ex-N9RLA
> Check out the Rover Resource Page at:
> http://www.qsl.net/n9rla
> QRP-l #1269
> IN-Ham list administrator
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
|