Amps
[Top] [All Lists]

Re: [Amps] Vacuum relays in Dentron MLA-2500

To: <W8AV@aol.com>, <amps@contesting.com>
Subject: Re: [Amps] Vacuum relays in Dentron MLA-2500
From: "Don Knight" <n4dek@triad.rr.com>
Date: Fri, 26 Dec 2003 12:46:58 -0500
List-post: <mailto:amps@contesting.com>
Ok but most of the vacuum relays I've seen are 24 volt. Anyone make a 12
volt vacuum realy? I assume I just hook the two relays up the way it's
hooked on the single realy now and just split the tr/rx sections?

                                            Thanks,Don
                                                n4dek
----- Original Message ----- 
From: <W8AV@aol.com>
To: <n4dek@triad.rr.com>; <amps@contesting.com>
Sent: Friday, December 26, 2003 12:35 PM
Subject: Re: [Amps] Vacuum relays in Dentron MLA-2500


> In a message dated 12/26/2003 11:53:08 AM Eastern Standard Time,
n4dek@triad.rr.com writes:
>
> > Wondering if maybe someone that has access to the schematic for the
MLA-2500 could take a look at it and let me know what I would need to change
this amp to use vacuum relays. I've been told that I would need two relays
but really don't know for sure. I've found several vacuum relays on ebay but
need to be sure of what I need to get. One or two? Voltage? ect.   I can't
deal with the relay noise in this amp any longer.
> > Please help!
>
> You need two if you are using SPDT vacuum relays, one to switch the
incoming RF from the transceiver to the input of the tubes and one to switch
the output from the amp to the antenna.  The MLA-2500 uses an open frame
DPDT relay to accomplish both of these functions.
>
> 73........de Goose, W8AV
>


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>