>On Sat, 06 Mar 2004 06:48:24 -0500, Ed Briggs wrote:
>
>>I can't find the point of the arc.
>
>_________________________________________________________
>
>My instinct tells me it's the tube. There may be some loose pieces of
>crud floating around inside. Try removing the tube and cycling the amp
>on and off a number of times to see if it still arcs.
>
>I had an AL-1200 years ago where the tube blew, but it wasn't
>intermittent - it blew in no uncertain terms. Ameritron replaced the
>tube under warranty.
? Bill -- What was the nature of the failure?
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|