Do it with 5763's and take plenty of pix!
Carl
KM1H
----- Original Message -----
From: "Colin Lamb" <k7fm@teleport.com>
To: "Carl" <km1h@jeremy.mv.com>; <gzook@yahoo.com>;
<amps@contesting.com>
Sent: Thursday, February 12, 2009 5:12 PM
Subject: Re: [Amps] 1625
>I built an amp using 4 x 6AG7 tubes. Ran 1000 volts on the plates and
>my 200 ma plate meter pinned when I talked, so I did not know how much
>current I was running. I have no idea if the plates got red hot -
>because they were metal tubes. I used it for a few years on 75 meters
>until I moved on. The amp was still working with the original tubes
>when I removed it from service, and I still have it. Drove it with a
>10A.
>
> Life was much simpler in those days. I think I will fire it up one of
> these days again.
>
> 73, Colin K7FM
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|