KBØNLY wrote:
> Got a question for everyone...
>
> When designing an amp how do you determine the value of the tune and load
> capacitor? I have been looking at a lot of designs online for HF and 6M, i'm
> currently working on building a 6M myself from a YU1AW design.
>
> Just seems to me there has to be some solid logic behind the values that
> these guys put down when they design the schematic for it.
>
> 73,
>
> Scott KBØNLY
>
Any ARRL Handbook or Bill Orr's Radio Handbook (Out of print for a
while) have tables and formulas for calculating the tank circuits.
There is also this spreadsheet by G3SEK based on the formulas in the
ARRL handbook.
http://www.esr.se/exteknik/radioteknik/Pi-L-Sup%20(web%20version).xls
Mike, W1NR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|