That was covered yesterday Lou. I was talking about a 30A circuit, not just the
wire.
Carl
KM1H
----- Original Message -----
From: Gudguyham@aol.com
To: km1h@jeremy.mv.com ; maflynn@att.net ; amps@contesting.com
Sent: Monday, August 10, 2009 8:21 AM
Subject: Re: [Amps] 240V Outlet
In a message dated 8/9/2009 9:49:43 P.M. Eastern Daylight Time,
km1h@jeremy.mv.com writes:
Going to #10 requires
>> all different plugs and outlets and the cost about goes thru the roof
>> compared to a 20A feed.
No really because you can run #10 wire from a breaker panel to a location
where an amp is to avoid voltage drop and then simply use a 20A breaker and
plug on that wire. You don't have to use 30A breaker or plug.
------------------------------------------------------------------------------
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|