Amps
[Top] [All Lists]

Re: [Amps] New HF amplifier

To: "Dennis OConnor" <ad4hk2004@yahoo.com>, <amps@contesting.com>
Subject: Re: [Amps] New HF amplifier
From: "Jeff Blaine" <keepwalking188@yahoo.com>
Date: Wed, 4 Aug 2010 20:52:33 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Denny,

I believe that was Larry's point also.  It's certainly my observation here. 
Does not take much of that power floating around in the cores to warm those 
babys up either.  :)

73/jeff/ac0c
www.ac0c.com


--------------------------------------------------
From: "Dennis OConnor" <ad4hk2004@yahoo.com>
Sent: Wednesday, August 04, 2010 7:21 PM
To: <amps@contesting.com>
Subject: Re: [Amps] New HF amplifier

> "So you're saying Alpha, Ten-Tec, Jim W8ZR, Jerry K8RA and myself are all 
> wrong and their designs don't or wont work?"
>
> ummmm, very short and very blunt answer, yes...
>
> Longer, more nuanced answer, those designs will not work "optimally" 
> because of lost energy (heat) from the pumping of out of phase currents in 
> the toroid cores that have taps and unused turns - energy that should have 
> gone out the coax...
>
> For a proper design, go look at the Palstar HF2500DX... Each band has it's 
> own separate toroid, uncoupled from the turns on the unused cores, so that 
> there are no out of phase currents induced into the operating core...
>
> If my answer is over blunt, I apologize -  you asked the question and that 
> is my answer... I am not looking to get into a squabble with anyone...
>
> cheers
> denny / k8do
>
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>