Unbelievable!!!
When I posted the link, there was the GS35B socket there as well. It
must have just expried.
Rest assured, the guy does make them. I have one here, as does VK6WF.
I also have a pair of his GI7B sockets.
He is in VE land and he is a country man of my father's. He will deal
direct outside of his ebay store business. That's how I got my GI7B
sockets. Saved a bit of money as well.
I'm sorry that I don't have his direct email on this computer. It
is on my beach qth pc. Anyway, email him via his ebay link and give
him your direct email. He may wish to deal with you direct.
73, Alek
VK6APK
At 07:41 AM 10/09/2010, Andy GD0TEP wrote:
>http://shop.ebay.com/nepeke25/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p43
>40
>
>They are good, but they're for the GI7b and 3cx3000, but not the GS35b...
>
> >-I am planning 3650V on the anode. This is significantly higher than
> >the "official" data sheets state, however I notice that the official
> >data sheets rate the tube for military service with less cooling. Does
> >3650V look like an OK voltage?
>
>Should be... I run 5KV, perhaps a little high, but it has worked fine since
>power up.
>
>
>73,
>Andy
>http://gd0tep.com
>
>
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
http://www.qrz.com/db/vk6apk
http://www.qrz.com/db/vk6ap
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|