[Top] [All Lists]

Re: [Amps] RF in the Audio

To: <>, <>
Subject: Re: [Amps] RF in the Audio
From: "Carl" <>
Date: Sat, 24 Sep 2011 09:31:44 -0400
List-post: <">>
>From several discussions on the air Ive listened to and on other forums it 
is far from a perfect solution in a real world enviroment.

What works in a lab doesnt mean its good elsewhere.


----- Original Message ----- 
From: "Jim Brown" <>
To: <>
Sent: Friday, September 23, 2011 9:50 PM
Subject: Re: [Amps] RF in the Audio

> On 9/23/2011 6:03 PM, Rob Atkinson wrote:
>> You don't wind your balanced feed on a torroid for crying out loud, a
>> method I find preposterous, and probably subject to heating and loss;
> You may not have heard about the concept, but it works quite well. DX
> Engineering has done similar things, but don't publish it.  I've done
> considerable work on the topic, and published both the theoretical basis
> and the measured data. Since I've done that in the tutorial, and because
> this reflector is about power amps, I won't repeat the discussion. If
> you open up some of their boxes you can see what they're doing.
> 73, Jim Brown K9YC
> _______________________________________________
> Amps mailing list
> -----
> No virus found in this message.
> Checked by AVG -
> Version: 10.0.1410 / Virus Database: 1520/3915 - Release Date: 09/23/11

Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>