Amps
[Top] [All Lists]

Re: [Amps] Need for bias switch (CW/SSB)

To: amps <amps@contesting.com>
Subject: Re: [Amps] Need for bias switch (CW/SSB)
From: Ron Youvan <ka4inm@gmail.com>
Reply-to: ka4inm@gmail.com
Date: Sun, 17 Jan 2016 09:55:45 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
   Kim N5OP Elmore wrote:

I don't think this is true. Class C will generate terrible key clicks because 
it won't preserve the keying envelope.

  That is not necessarily so, the keying waveform will be altered for
sure, but I operated my Heath DX 100 for years with the plate current
completely cut off with the "clamp tube" because I was using a S.S. TR
switch and a single electron made noise in the receiver.  No one ever
mentioned anything wrong with my signals.  (RST = 599 even from friends
and co-workers)
--
  Ron  KA4INM - Youvan's corollary:
                Every action results in unwanted side effects.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>