Yes; a buck/boost transformer with its secondary
wired in series with the OEM transformer needs to
have a secondary rated AT LEAST as high as the
OEM transformer's primary current requirement.
And yes, it will have an EFFECT on the output,
AFFECTing all voltages on the OEM transformer...
it will make ALL the voltages correct.
Bryan WA7PRC
--------------------------------------------
Date: Sun, 11 Dec 2016 14:32:08 -0500
From: RCM <robrk@nidhog.net>
To: AMPS submit <amps@contesting.com>
Subject: Re: [Amps] HIGH FILAMENT VOLTAGE
> On Dec 11, 2016, at 14:12, Bryan WA7PRC wrote:
>
> I suggest NO diodes or resistors in the LV side of the
xfmr.
> A buck transformer in the primary loses or looses [sic]
the
> least power.
> The secondary needs to handle the amplifier's
> primary current.
????????????
Many Amps, Heath SB220, Many Henrys, filament voltage
is supplied from a winding on the main transformer.
Anything stuck on the primary will effect all voltages.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|