Does the FT1000D have an ALC overshoot issue at lower power?
If not, then ALC is not needed. ALC connection to the amplifier wont help
the ALC overshoot issue anyway...
73
Jim W7RY
-----Original Message-----
From: Fern Rivard
Sent: Tuesday, February 28, 2017 6:28 PM
To: Mike & Becca Krzystyniak ; amps@contesting.com
Subject: Re: [Amps] Questions on Alpha 8410
Hi Mike: Make sure that you throttle back the output on the FT-1000D to
only 40/50 watts or the amp will trip out.
Fern VE7GZ
-----Original Message-----
From: Mike & Becca Krzystyniak
Sent: Tuesday, February 28, 2017 11:01 AM
To: amps@contesting.com
Subject: [Amps] Questions on Alpha 8410
Greetings Thermionic Sages,
I'm looking at an Alpha 8410 for a friend that is exhibiting what I
consider a weird problem.
This amp is 2 weeks old and worked fine until two days ago.
On SSB, legal limit out in a casual round table, after a little time
transmitting the amp faults and trips out.
It resets in about 4-5 seconds and then works for awhile before the same
thing happens.
The exciter is a FT-1000D. Does this amp need ALC?
Is there an accessible fault table or software application that read out
the faults and might give a clue?
Thanks in advance.
73 Mike K9MK/5
PS: On a side note, I know Alpha changed hands but are they still in
business?
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|