Amps
[Top] [All Lists]

Re: [Amps] HV MOSFETs for RF

To: Amplifiers <Amps@contesting.com>
Subject: Re: [Amps] HV MOSFETs for RF
From: Richard Solomon <dickw1ksz@gmail.com>
Date: Fri, 5 May 2017 11:22:22 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Cellphone audio is just plain terrible,
and with digital compression, cable tv
has lost a lot of their picture quality.

I used to get an OTA network Football
telecast and switch over to the cable
broadcast.
The difference in picture quality was
clear even to these old eyes.

73, Dick, W1KSZ

On Fri, May 5, 2017 at 11:06 AM, Catherine James <catherine.james@att.net>
wrote:

> What components do they typically use for their final output, high-power
> devices?  Could hams use the same approach? How do they get around the
> efficiency and cooling problems we've been discussing?
>
> 73,
> Cathy
> N5WVR
>
> --------------------------------------------
> Paul Christensen <w9ac@arrl.net> wrote:
>
>  >"Does anyone outside of ham radio care about modulation modes that
> require excellent linearity?"
>
>  The cellular and broadband/CATV industries to name two.
>
>  Paul, W9AC
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>