At 12/8/2005 10:21 PM, you wrote:
>K1EP:
> >The point here was that you can't use an external keyet (CT in this
>case) and the internal keyer at the same time on the MP without manipulating
>menus.
>
> Ed, I haven't ever used an internal rig
>keyer...too awkward to adjust speed with that
>tiny MP knob and inflexible for memories. The
>manufacturers could omit them as far as I'm
>concerned. I think the real point was to have
>both computer and manual keying available, which
>both Orion and the MP can do handily.
No, the original point from AD1C was that he could not use the internal keyer
with CT.
>From: Jim Reisert AD1C <jjreisert@alum.mit.edu>
>To: ct-user@contesting.com
>Date: Tue, 6 Dec 2005 07:39:38 -0800 (PST)
>
>
>However, many people want to use the internal keyer in the radio instead of an
>external one. This causes problems with some TenTec and Yaesu radios because
>the same jack on the radio is used for either a straight key or paddles, but
>not both. So you can not connect both CT and a set of paddles to the radio.
>
>My ICOM 756 does not have this problem, there is a paddle input jack on the
>front panel, and a straight key jack on the back.
>
>73 - Jim AD1C
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|