Thanks sir!!! I am building something smiler to your setup, and the
info helps!
--
73's, and thanks,
Dave
For software/hardware reviews see:
http://www.nk7z.net
For MixW support see:
https://groups.yahoo.com/neo/groups/mixw/info
For SSTV help see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Fri, 2016-02-12 at 08:56 -0700, Tom Thompson wrote:
> Hi Dave,
>
> We were using a 3 ft. whip with a high impedance preamp into a
> Perseus
> receiver. The antenna system was mounted on the car using a mag
> mount.
> I use a similar setup with an SDRPlay receiver. Since the antenna
> system is broadband, you don't have to worry about a frequency
> sensitive
> antenna factor affecting your readings. One concern is that the
> receiver/preamp does not being overloaded with strong broadcast
> stations. We built our preamps with attenuation in the AM and FM
> broadcast spectrum.
>
> Tom W0IVJ
>
> On 2/12/2016 5:00 AM, Dave Cole wrote:
> > Hi Tom,
> > I assume you were using SDR, could you expand a bit on your setup
> > please... I will be putting together a SDR radio for RFI location
> > later this year, and any tips would be appreciated. I am looking
> > to
> > use a RPI, and one of those little dongles, and a downconverter.
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|