TenTec
[Top] [All Lists]

[TenTec] Scout SSB audio problems.....

To: <tentec@contesting.com>
Subject: [TenTec] Scout SSB audio problems.....
From: k6sdw@hotmail.com (Eddy Avila)
Date: Sun, 17 Nov 2002 22:49:09 +0000
Good idea Bill!!! I've removed the foam rubber then remembered reading about 
drilling a hole in the back of some had mics which some tmes also improves 
the quality of the audio....did both mods and on another receive sounds ok, 
now looking fer a ham friend familiar with the way it sounded before and 
judge if the audio has improved!

Will let ya know if they judge it better or not....

tnx...73 /ed

>From: "Bill Fulling" <w4njf@midflorida.com>

>Hello Ed,
>Open up the mike and remove the piece of foam rubber thats in front of the
>mike element.
>It looks sort of like an ear protector.Makes a whole lot of difference.
>73 de W4NJF
>
>Bill Fulling

>From: "Eddy Avila" <k6sdw@hotmail.com>

>
> > Howdy again,
> >
> > Using my Scout and the Ten Tec 701 hand mic sold for this rig I get
>reports
> > that my audio is muffled and way too much low's...I have two 701 mics 
>and
> > both exhibit the same problem. However, using a Shure Bros desk mic with 
>a
> > dyamic element the guys say my audio is much improved, but still not
>great!
> >
> > Any help solving this audio problem mystery would be great appreciated!
> >
> > tnx....73 /ed


_________________________________________________________________
The new MSN 8: advanced junk mail protection and 2 months FREE* 
http://join.msn.com/?page=features/junkmail


<Prev in Thread] Current Thread [Next in Thread>