TenTec
[Top] [All Lists]

RE: [TenTec] Heil ProSet adapter with Orion -- hum

To: <tentec@contesting.com>
Subject: RE: [TenTec] Heil ProSet adapter with Orion -- hum
From: "RM" <royalct@inr.net>
Reply-to: tentec@contesting.com
Date: Thu, 24 Jun 2004 06:29:49 -0400
List-post: <mailto:tentec@contesting.com>
In a nutshell, I solved my RFI induced audio problem with the Orion and my
Heil microphones by tying the Heil's Mic shield to both the Orion's audio
ground and to the Orion's chassis connector in the manner described by Heil
on their web site...... On the air reports have validated the resolution of
the problem in this manner.

Similarily, I had RFI induced  problems with my Icoms 775DSP and Heil
microphones.  Connecting the Heil's shield to both the microphone and
chassis ground solved the problem.


Ron ... NU1U

-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Bill Tippett
Sent: Wednesday, June 23, 2004 20:22
To: tentec@contesting.com
Subject: [TenTec] Heil ProSet adapter with Orion -- hum

AC5AA wrote:
 >"The microphone cable shield must be tied to the transceiver's microphone
connector shell."

         You guys owe me a beer since I had a HECK of a time finding this on
Heil's website:

http://www.heilsound.com/harmonics.htm

...and scroll down to "REMOVING RFI FROM AUDIO INPUTS"

73,  Bill  W4ZV 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>