Gentlemen,
Thank you for your comments of the other day - I have learned a bit
more. I would have never considered -10 dB on the TX Eq for rag chewing
much less -13 dB to -15 dB for pileups. I tried these settings using the
monitor and was surprised that it did not sound too bad at all. Normally I
use a setting of - 5dB all the time but I will experiment. I am always
leery of the monitor as one hears ones voice through the body and even
leaking through padded ear muffs. However it is a useful feature for which
I am grateful. Thanks to N1EU for these settings. I also found the
comments from k4tax most helpful. Thanks also to WA3MKB - the Heil Pro Set
Plus will replace my Sony stereo headphones. Perhaps Heil should
manufacture their headset without the mike - this would be a useful option.
I am grateful for the information. There is a false message given by some
that one needs to be an engineer to operate the O2. The factory settings
are a good starting point but this is a rig which one learns over time how
to tailor for your own needs.
I hope that TenTec is not so disheartened by our criticisms that they
are through with updates for the Orion series. We will never all be happy
but I do treasure the O2 and maybe the NR can be further improved - it is
better. Comments about weaknesses such as electrolytics are helpful to us
all for when the dreaded breakdown occurs. Thanks again to all for an
excellent forum.
73 Doug EI2CN
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|