TenTec
[Top] [All Lists]

Re: [TenTec] Orion III

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] Orion III
From: "Don Jones" <ko7i@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 14 May 2011 12:45:02 -0700
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
DITTO! Excellent on CW, SSB not a big improvement here on my 6 opt 3 too.

Don Jones 
Arlington, WA 

-----Original Message-----
From: Bob Good [mailto:k4bg@planters.net] 
Sent: Saturday, May 14, 2011 8:59 AM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Orion III

Noise Reduction "NR" :   I mostly agree with Carl.  My gear is Omni VI Opt-3

and opt-1 on a second unit.  SSB is a significantly "modified" sound making 
it more difficult to understand due to the lack of sibilance.  However, 
personally I like the "modified" sound when copying CW.  I would describe it

as "enhanced".  On CW,  I use speeds up to 35 wpm or so with the "NR" always

"on".  Regards,  Bob K4BG

--------------------------------------------------
From: "Carl Moreschi" <n4py2@earthlink.net>
Sent: Saturday, May 14, 2011 11:37
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Orion III

> The NR you are talking about does not exist on any radio.  Still to this
> day I have never seen an NR that truely helps with copy.  They might
> make things quieter but copy is always best under difficult conditions
> with NR off.
>
>
> Carl Moreschi N4PY
> 121 Little Bell Dr.
> Hays, NC 28635
> www.n4py.com
>
> On 5/14/2011 11:12 AM, Tony Lelieveld wrote:
>> Hi all,
>>
>> I agree. I'd go with an external panadapter. Why are people rumbling 
>> about
>> an Orion III? Let's get the O-II finalized first. I am still waiting for
>> an upgrade that will improve the NR part of the rig. One that, when you
>> activate it, will truly reduce the noise WITHOUT altering the audio 
>> quality
>> of the voice you're receiving.
>>
>> On some signals it seems to work okay but mostly it distorts the audio 
>> and
>> acts erratically and I am running ver. 2.044A. Different settings of the
>> AGC threshold and manual AGC level do not seem to make much difference.
>>
>> 73, Tony VE3DWI
>>
>>
>> ----- Original Message -----
>> From: "Barry N1EU"<barry.n1eu@gmail.com>
>> To: "Discussion of Ten-Tec Equipment"<tentec@contesting.com>
>> Sent: Thursday, May 12, 2011 12:29 PM
>> Subject: Re: [TenTec] O3 wish list
>>
>>
>>> Well said and totally agree Paul. Limited engineering resources can
>>> be put to much better use. If the rig mfr provides I.F. output,
>>> they've done their job.
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 



_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>