Thanks Al, I'll try that.
Regards
Michael
Sent from my iPad
On Dec 8, 2012, at 1:27 PM, "Al Gulseth" <wb5jnc@centurytel.net> wrote:
> Mike,
>
> Before blaming the filter try tuning around and/or move the passband tuning
> control (PBT) back and forth a bit. The 282 has an extremely narrow peak and
> can sound like there's nothing there if you're not tuned in correctly on the
> signal and/or properly centered on the passband. (Personal experience
> here....)
>
> 73 es GL, Al
>
> On Fri December 7 2012 12:51:16 pm Silevitch, Michael wrote:
>> Does anyone have any insight into problems (and solutions) that would cause
>> failure in a Ten Tec model 282 (or any other similar model) crystal filter?
>> When the unit is plugged into its slot (on a Corsair) we get no response.
>> Our next step is to test it on a network analyzer but I felt it would be
>> worthwhile to also get inputs from people on the reflector.
>>
>> Regards,
>> Mike K1PEV
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|