TenTec
[Top] [All Lists]

Re: [TenTec] In praise of older technology AM transmit with TenTec rigs

To: "R. Eric Sluder-W9WLW" <resluder@yahoo.com>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] In praise of older technology AM transmit with TenTec rigs
From: Ed Purvis <wa4njy@yahoo.com>
Reply-to: Ed Purvis <wa4njy@yahoo.com>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 27 Feb 2014 08:22:16 -0800 (PST)
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
The Eagle seems to be a Ferrari with roll-up windows.

The OMNI VII (had one) is a Mustang with nice options.

Best analogy I can muster now.

Ed




________________________________
 From: R. Eric Sluder-W9WLW <resluder@yahoo.com>
To: Discussion of Ten-Tec Equipment <tentec@contesting.com> 
Sent: Thursday, February 27, 2014 10:32 AM
Subject: Re: [TenTec] In praise of older technology AM transmit with    TenTec  
rigs
 

Bry:

You won't find a simpler rig to use that rates high on Rob's list for receiver 
performance, and that is the Eagle.  It's so simple, that when I got mine I 
actually went through "Knob Withdrawal" in that I started second guessing if I 
made the right decision.  You look at the radio, and it does what you want it 
to do, but has so few buttons or knobs that you ask yourself, "did I over pay 
for this box?"  It just goes to show you how programmed we've become with the 
marketing hype in Ham Radio.

The Eagle isn't for everyone, but it's a great mobile, or great home based 
radio if you realize, it's not designed to be a contest class radio even though 
the receiver is contest class grade.  It's a top notch radio inside a box with 
simple controls for those who might use it in an RV, or mobile in a car, and 
for rag chewers, general ops. IMO


73

 
- R. Eric Sluder 

W9WLW 








>________________________________
> From: Brian Carling <bcarling@cfl.rr.com>
>To: Discussion of Ten-Tec Equipment <tentec@contesting.com> 
>Sent: Thursday, February 27, 2014 7:23 AM
>Subject: Re: [TenTec] In praise of older technology AM transmit with TenTec    
>rigs
> 
>
>The Omni VII discussion is very informative. I need encouragement when it 
>comes to accepting the ergonomics of most modern rigs. The FT450 felt like I 
>was burned with its horrible menu system. I actually prefer the FT857D... But 
>anything like the TS590 is just not going to work here. The OMNI VII 
>arrangement sounds far more practical than most menu controlled rigs.
>
>Best regards - Bry Carling AF4K
>
>
>
>> On Feb 27, 2014, at 6:31 AM, Richards <jrichards@k8jhr.com> wrote:
>> 
>> 
>> 
>> On 2/26/2014 6:13 PM, R. Eric Sluder - W9WLW wrote:
>> 
>> I see where even on the new and highly touted TS-590 you do some serious 
>> button pushing too.
>> 
>> 
>>        I have a TS-590 and the Omni VII in my shack.
>> 
>>        I like both radios, but I prefer operating the
>>        Omni VII.  It is not so much the multiple pressing
>>        of buttons, as the fact the display only shows
>>        one menu item at a time, so you either press
>>        several buttons to adjust several things, or you
>>        must work the multi knob and scroll through like
>>        87 or more items sequentially to get what you want,
>>        which is NOT as quick and easy as looking at a
>>        list of 18 or 19 items at once, and quickly scrolling
>>        to the one you want.   Remembering the menu item
>>        numbers on the 590 is not as easy as just looking
>>        at a menu list and seeing what you want among
>>        the rest all at once.   (hard to describe...hopefully
>>        you get the gist. )
>>        menu item at a time
>> 
>>        I will send Brian a comparison piece I wrote
>>        that compares how stuff gets done with each
>>        rig and maybe that will help him judge for
>>        himself.    It IS a valid inquiry!
>> 
>> 
>> 
>>> 
>>> The single tree menu in the Omni VII software is sweet.... you're not 
>>> trying to go thru layers of menu settings.
>> 
>> 
>> 
>>        Amen.   The only way to get that sort of
>>        convenience in setting features is to use
>>        the ARCP-590 software.   I really like the
>>        Omni VII simple menu when I am in a hurry
>>        like during a contest or when trying to catch
>>        rare DX before the pile ensues, and I find
>>        the Omni VII menu way easier to navigate in
>>        a hurry like that.  You have to use the ARCP
>>        software to get anything close to a single
>>        menu.   The 590 has like 87 menu items
>>        and the Omni VII about half that number
>>        with 18 or 19 showing at any one time.
>> 
>>        I like both radios, but the Omni is easier to
>>        run, I think, than the 590.
>> 
>> 
>>        The Omni VII buttons are larger, with more space
>>        between them.   The features you change most
>>        encircle the main display.  The concept is easy.
>>        You press the feature you want, and adjust it with
>>        the Multi Knob.  That is the basic plan... select
>>        and adjust.   If you want to adjust another feature,
>>        just select it by pressing its front panel button
>>        and adjust the value with the multi knob.
>> 
>>        Once you get onto that procedure, it all sorta works
>>        the same way.  (OK... there might be an exception
>>        or two, but that is the gist of the process.)
>> 
>> 
>> Just MY take.
>> 
>> ----------------------  K8JHR  -----------------------
>> 
>>        
>>        
>> 
>> 
>> 
>> 
>> /
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec

>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>