TenTec
[Top] [All Lists]

Re: [TenTec] Eagle vs. TS-590S

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Eagle vs. TS-590S
From: Robert <rmcgraw@blomand.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 6 Jul 2014 19:54:01 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Yes HRD will control the Omni VII as well as N4PY software.   You will need a 
RS-232 to USB converter.  Get the one from Tentec. It works where others may or 
may not. 

73
Bob K4TAX



Sent from my iPhone

> On Jul 6, 2014, at 7:33 PM, Brian Carling <bcarling@cfl.rr.com> wrote:
> 
> Sorry to digress but I have similar questions...
> 
> Will HRD 5 work with my Omni VII arriving this week?
> 
> I'm not sure if it's coming with an interface cable for my Win8 laptop.
> 
> Was the serial interface something standard that comes with an OM7?
> 
> Best regards - Bry Carling AF4K
> 
> 
> 
>> On Jul 6, 2014, at 3:27 PM, G Reichow <wa0yle12@gmail.com> wrote:
>> 
>> Thanks Rick, this is the kind of information I'm looking for and all the
>> responses so far have been very helpful. I read this reflector every day
>> and it always has good info.
>> 
>> Gary - KN0V
>> 
>> 
>>> On Sun, Jul 6, 2014 at 10:33 AM, Rick - DJ0IP / NJ0IP <Rick@dj0ip.de> wrote:
>>> 
>>> The Eagle has a slightly better receiver, especially on the higher bands.
>>> The ergonomics of the Kenwood are more typical of what most people are
>>> familiar with.
>>> 
>>> Unfortunately Omnirig does not support the Eagle so you may find that some
>>> contest logging packages are not fully compatible with it.  They will
>>> probably still work in Orion2 mode, but with a couple of bugs.
>>> 
>>> The 3rd order IMD of the Kenwood is slightly better than the Eagle, but the
>>> 590 has broadband noise problems.  The Eagle has none.  This makes the
>>> Eagle
>>> more suitable for using at multi TX sites.
>>> 
>>> The 590 'had' a problem with ALC power spikes on TX.  If you buy a new one,
>>> the problem has been fixed.  If you buy a used one, it probably has this
>>> problem.  This caused many of the modern linear amplifiers to trigger to
>>> fault.  This is very annoying, but Kenwood will fix it for free if you are
>>> the original owner.  Not sure of their policy for used rigs, but I have
>>> heard it costs $200 for the mod.
>>> 
>>> Several people who have used both radios, including members of the Ten-Tec
>>> group(s) preferred the ergonomics of the Kenwood better.
>>> IMO this only makes a difference when you have several rigs and switch back
>>> and forth a lot.
>>> If you only use one rig, you quickly become accustomed to just about
>>> anything.
>>> 
>>> Neither rig has band data available on the rear panel for switching
>>> external
>>> switches such as antennas or band filters.  If you want that, you have to
>>> spend a lot more money on the radio.
>>> 
>>> For running a linear amp in CW, the Kenwood has adjustable TX-delay and
>>> hang
>>> time delay, each of the proper lengths (if you set the menu parameters
>>> correctly).  The Eagle does not.  It is about 5mS too slow on TX-delay and
>>> has no hang delay at all.  Unless you have a full QSK linear, you will need
>>> to purchase the model 318 amp keyer - or for about $10 you can build it
>>> yourself. OR use an external keyer which incorporates adjustable keying
>>> delays, such as the WinKey - which is probably a good idea anyway if you
>>> are
>>> into contesting.
>>> 
>>> FINALLY:  Ten-Tec owners are nicer people.  If you don't believe that, just
>>> ask us!  ;-)
>>> 
>>> For my current needs, the Eagle is the best radio in the world.
>>> Your mileage may vary.
>>> 
>>> 73 - Rick, DJ0IP
>>> (Nr. Frankfurt am Main)
>>> 
>>> 
>>> -----Original Message-----
>>> From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of G Reichow
>>> Sent: Sunday, July 06, 2014 5:16 PM
>>> To: tentec@contesting.com
>>> Subject: [TenTec] Eagle vs. TS-590S
>>> 
>>> Hello all,
>>>     I am in the market for a new radio. Originally I was looking at the
>>> FTDX-1200 and the TS-590S as both of those are within my budget.
>>> Now, with the mega-sale, the Eagle is within my budget as  well. I was
>>> leaning toward the 590S due to its receiver. So I guess it comes down to
>>> the
>>> 590 or Eagle. My primary interests are dx'ing and contests.
>>> Constructive input and thoughts are welcome.
>>> 
>>> Tks - Gary (KN0V)
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>> 
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>