In a message dated 98-08-10 07:40:22 EDT, w7ni@teleport.com writes:
> You can also install them at the
> junction of the top section and the section below it if you cut out one
> horizontal brace at the bottom of the top section so you can get the
rotator
> inside the tower.
A Ham IV can be pushed (grunted?) through the diagonals without cutting
them.
Cheers, Steve K7LXC
Champion Radio Products
http://www.championradio.com
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|