[Top] [All Lists]

Re: [TowerTalk] Rotator Clamps

To: <>
Subject: Re: [TowerTalk] Rotator Clamps
From: "Courtney Judd K4WI" <>
Date: Wed, 1 Mar 2006 19:24:54 -0600
List-post: <>
Steve, FWIW, no clamp will hold in a outdoor changing environment for a long
period of time.  All metals expand and shrink with temperature variations. I
have a Rohn 25.. 110 Ft with an old KLM 20 mtr Big Stick... 59' boom and
135#  turning by an old Tailtwister.  The clamps are only snugged tight;
just enough to basically hold the array in normal conditions. I drilled a
hole thru clamp holders and pipe  ... 1/4 inch and installed 1/4 in grade 8
bolt. Use grade 8 as it will shear cleanly rather than tear. In 20 years
nothing as ever happened to the rotator, tower, or antenna; but usually at
least once a year a trip up the tower was necessary to replace the sheared
bolt. The antenna is pinned with a much bigger bolt. The 1/4 in. is the
safety  fuse so to speak. IMHO, the best way out! 73's Cort K4WI


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>